FIS Q7909 Stripper (FIS-Q7909)

FIS-Q7909 Is used as supplied (do not dilute)

Bath Operation: Components should be fully Immersed In the FIS-Q7909 until the coating has been removed or broken down sufficiently to achieve removal by subsequent high-pressure rinsing. Movement of the FIS-Q7909 over the components being stripped will speed up removal. It Is generally advised to use a 50mm oil seal or water and a light machinery/spindle type oil to prevent excessive solvent loss and odour.

Dispose of chemicals in accordance with local environmental legislation Local environment registrations.

All relevant safety data information must be read before handling this product. Extractor plus adequate ventilation must be provided to keep the airborne concentrations below the exposure limits. Wear a respirator fitted with the following cartridge: Gas filter, type AX. Goggles must be worn giving total eye protection.

Gloves must be worn to protect the skin. A protective apron plus rubber boots, or other suitable protective clothing must be worn whilst handling this material. Contaminated clothing should be removed and washed before re-use.